No edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
====Finishing Up==== | ====Finishing Up==== | ||
--[[User:Knigh7s|Knigh7s]] 00:40, 22 April 2009 (UTC) | |||
Revision as of 16:40, 21 April 2009
Information
The spare tire knobs have a weak point just under the screw head. When turned to tightly or even constantly removing the cover, they tend to tear in half. Here is a tutorial to help "prevent" or "prolong" the life of an unbroken knob or repair a borken one.
Tools Needed
- Needle Nose Pliers
- Dremel or Rotory Tool
- Dremel 430: 1/4" Drum Sander
- Dremel 438: 1/4" 120 Grit Sanding Band
- Metal Clay (looking for brand/description)
Tutorial
Getting Started
Unbroken Knobs
1st off, you will need to remove the retaining clip from behind the panel that hold the knobs in place.
be careful not to break the knob in half! Follow the Arrows
Now with the Dremel and your small 1/4" drum sander, lightly sand down the inside of the knobs. Be careful not to apply any pressure, you do not want to tear any material out, you just want to get rid of the smooth surface
Broken Knobs
Finishing Up
--Knigh7s 00:40, 22 April 2009 (UTC)